|
|
DRIVE SHAFT ASSEMBLY TSB Revision FRONT AXLE 26-16 <<C>> DRIVE SHAFT/DRIVE SHAFT AND INNER 1. Use special tools MB990242, MB990244, MB991354 and MB990767 to push out the drive shaft or the drive shaft and 2. Remove the drive shaft from the hub by pulling the bottom of the brake disc towards you. CAUTION • Do not pull on the drive shaft; doing so will damage the TJ or PTJ; be sure to use the pry bar. • When pulling the drive shaft out from the transaxle, be careful that the spline part of the drive shaft does not 3. Insert a pry bar between the transaxle case and the drive shaft, and then pry and remove the drive shaft from the AC102550 MB990244 MB991354 MB990242 MB990767 AC AC102551AD DRIVE AC100141AJ TRANSAXLE TJ ASSEMBLY <2.4L> PRY BAR AC305799 AB PRY BAR |