|
|
INPUT SIGNAL PROCEDURES TSB Revision SIMPLIFIED WIRING SYSTEM (SWS) 54B-532 STEP 7. Check the wiring harness between power window NOTE: Also check intermediate connector C-26 for loose, cor- . Q: Is the wiring harness between power window main switch connector E-12 (terminals 5 and 10) and system works normally, input signal from the door lock NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged AC305413AH CONNECTOR: C-217 HARNESS SIDE 25 26 27 28 29 21 22 23 24 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 JUNCTION BLOCK (REAR VIEW) AC305262 3 4 12 14 6 13 5 1110 8 2 7 1 HARNESS SIDE CONNECTOR:E-12 AC AC305231 CONNECTOR: C-26 AK |