Mitsubishi Lancer (4A9 engine). Manual - part 40
TROUBLESHOOTING
ACTIVE STABILITY CONTROL SYSTEM (ASC)
35C-13
NOTE:
.
•
*1
: Turns on when two or more wheels are faulty.
•
*2
: Stays on until the vehicle speed reaches 10 km/h when the ignition switch is turned to ON next time.
•
*3
: Does not illuminate when there is no effect to the EBD function.
•
*4
: Does not illuminate when there is no effect to the ABS function.
•
*5
: This diagnosis code is not set with the vehicle speed of 20 km/h or less.
Under EBD, ABS, stability control and TCL control in case of failure
Diagnosis
code No.
Item
EBD
ABS
Stability
control
TCL
ESS
C100A
Abnormality in FL wheel speed
sensor circuit
Enabled
*3
Prohibited
Prohibited Prohibited Prohibited
C1015
Abnormality in FR wheel speed
sensor circuit
C1020
Abnormality in RL wheel speed
sensor circuit
C102B
Abnormality in RR wheel speed
sensor circuit
C1011
Abnormality in FL wheel speed
sensor signal
Enabled
*3
Prohibited
Prohibited Prohibited Prohibited
C101C
Abnormality in FR wheel speed
sensor signal
C1027
Abnormality in RL wheel speed
sensor signal
C1032
Abnormality in RR wheel speed
sensor signal
C1014
Mutual monitoring of FL wheel
speed sensor
Enabled
*3
Prohibited
Prohibited Prohibited Prohibited
C101F
Mutual monitoring of FR wheel
speed sensor
C102A
Mutual monitoring of RL wheel
speed sensor
C1035
Mutual monitoring of RR wheel
speed sensor
C1041
Abnormality in periodical signal
for FL wheel speed sensor
Enabled
*3
Prohibited
Prohibited Prohibited Prohibited
C1042
Abnormality in periodical signal
for FR wheel speed sensor
C1043
Abnormality in periodical signal
for RL wheel speed sensor
C1044
Abnormality in periodical signal
for RR wheel speed sensor