Mitsubishi Eclipse. Manual - part 644
SPECIFICATIONS
TSB Revision
MULTIPORT FUEL INJECTION (MFI) <3.0L>
13B-1119
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATION
M1131011600465
GENERAL SPECIFICATIONS
M1131000200515
ITEM
SPECIFICATION
Dashpot
3.4
± 1.0 N⋅m (30 ± 9 in-lb)
Engine coolant temperature sensor
29
± 10 N⋅m (22 ± 7 ft-lb)
Fuel high-pressure hose
4.9
± 1.0 N⋅m (44 ± 8 in-lb)
Fuel rail mounting bolt
12
± 1 N⋅m (100 ± 13 in-lb)
Fuel pressure regulator
8.8
± 1.0 N⋅m (78 ± 9 in-lb)
Idle air control motor
2.0
± 0.5 N⋅m (18 ± 4 in-lb)
Lever assembly
4.9
± 1.0 N⋅m (43 ± 9 in-lb)
Throttle body bracket M6
4.9
± 1.0 N⋅m (44 ± 8 in-lb)
Throttle body bracket M8
6.9
± 1.5 N⋅m (61 ± 13 in-lb)
Throttle body to intake manifold bolt
19
± 3 N⋅m (14 ± 2 ft-lb)
Throttle position sensor
2.0
± 0.5 N⋅m (18 ± 4 in-lb)
Throttle speed adjusting screw mounting bolt
2.0
± 0.5 N⋅m (18 ± 4 in-lb)
ITEMS
SPECIFICATIONS
Throttle body
Throttle bore mm (in.)
60 (2.4)
Throttle position sensor
Variable resistor type
Idle air control motor
Stepper motor (stepper motor type by-pass air
control system with the air volume limiter)
Engine control
module (ECM)
<M/T>
Identification model No.
E6T35971 <Eclipse and Eclipse spyder without
variable induction system>
E6T35972 <Eclipse-with variable induction system>
E6T35973 <Eclipse spyder-with variable induction
system>
Powertrain
control module
(PCM) <A/T>
Identification model No.
E6T34184 <Eclipse and Eclipse spyder without
variable induction system>
E6T34187 <Eclipse-with variable induction system>
E6T34186 <Eclipse spyder-with variable induction
system>