Vehicle Care
200
L
Note:
•
Renew the wiper blades when worn to
prevent scratching. Clean the rubber
wiper blades regularly with a mild
detergent solution.
•
It is advisable to clean the windshield
with Jaguar Screen Clean Paste at
regular intervals.
Cleaning the rear screen
To avoid damaging the heating and radio
elements when cleaning the inside of the
rear screen use only a soft damp cloth or
chamois leather. Do not use solvents or
sharp objects to clean the glass.
Polishing paintwork and brightwork
For maximum protection against road
dust, salts, industrial fall-out etc., it is
recommended that the vehicle is polished
regularly using Jaguar Polish and a
Polishing Cloth.
Note: The vehicle’s brightwork should be
cleaned in the same way as the paintwork:
chrome polish or other abrasive cleaners
must not be used.
Paint chips
Scratches and chips should be
touched-in before weathering action
begins. Inspect the paintwork
immediately after the vehicle has been
washed.
Underhood cleaning
Underhood cleaning using high pressure
hoses or steam cleaners should be done
by a Jaguar Dealer. Indiscriminate use of
cleaning equipment could damage or
contaminate the electronic control
modules and fuse boxes.
CARE OF ALLOY ROAD
WHEELS
The alloy road wheels are covered with a
protective anti-corrosion coating. To
prevent corrosion it is essential that this
coating is not damaged.
When removing or fitting tires, always
advise the tire fitter to treat the alloy
wheels with great care and to only use
equipment with spigot or stud hole
clamping. The equipment must not have
any moving parts which contact the
wheel, and tire levers must not be used.
Wash the wheels with soap and water at
two week intervals to avoid an
accumulation of particles, which could
become embedded in the wheel surface.
In salty conditions the wheels should be
cleaned weekly.
Jaguar acid-free wheel cleaner can be
used to remove heavy soiling, however,
non-approved acid-based cleaners
should not be used.
The size of the wheel rims is stamped or
cast on all wheels.