|
|
6A – 2 ENGINE MECHANICAL
MAIN DATA AND SPECIFICATIONS Engine model Item 4JA1 4JB1T Engine type Four-cycle, overhead valve, water cooled Direct injection Dry type, chrome plated, stainless steel tube Gear drive No. of cylinders-bore × stroke mm (in) 4 – 93 × 92 (3.66 × 3.62) 4 – 93 × 102 (3.66 × 4.02) No. of piston rings Compression ring: 2 / Oil ring: 1 Total piston displacement cm 3 (in 3 ) Compression ratio (to 1) 2,499 (152.4) 18.5 2,771 (169.0) 18.1 Compression pressure kg/cm 2 (psi/MPa) 31 (441/3.0) – 200 rpm Engine weight kg (lb) Approximately 226 (498) Approximately 250 (550) Fuel injection order 1 – 3 – 4 - 2 Fuel injection timing BTDC deg 12 11 Specified fuel type rpm Valve clearances (At cold): Intake mm (in) Exhaust mm (in) Intake valves Open at (BTDC) deg Close at (ABDC) deg Exhaust valves Open at (BBDC) deg Close at (ATDC) deg Fuel system SAE No. 2 diesel fuel 750 0.4 (0.016) 24.5
BOSCH distributor VE type Governor type Mechanical (Variable speed) Mechanical (Limit speed) Injection nozzle type Injection nozzle opening pressure (Design value)
kg/cm 2 (psi/MPa) Single spring type Main fuel filter type Lubricating system Lubricating method Hole with 5 orifices
185 (2,631/18.1)
Cartridge paper element and water separator
Pressure circulation Specified engine oil (API grade) CC or CD CD Oil pump type Oil filter type Oil capacity lit(US/UK gal) Oil cooler type Gear Cartridge paper element 6.5 (1.7/1.43) Water cooled
4JB1T : 4JB1 Engine with turbocharger. |