|
|
Content .. 1756 1757 1758 1759 ..
DIAGNOSIS 7A2-83
DTC P0602 Programming Error • When reprogramming operation is stopped under Service Programming System (SPS). • When non programmed TCM (blank TCM) is used without Service Programming System (SPS). • Lock-up is inhibited. • All solenoid operations stop (OFF) and the gear is fixed to the 3rd. • Low battery voltage while Service Programming System (SPS) is operated. • No programmed TCM (blank TCM) is used. Reprogram the TCM using with Service Programming System (SPS).
|