|
|
4JA1-TC/4JH1-TC ENGINE DRIVEABILITY AND EMISSIONS 6E–67 21 Diagnostic Active 0V/ Inactive 12V Inactive 12V Inactive 12V This displays the diagnostic request signal. This should 22 System Voltage V 11 - 14 11 - 14 11 - 14 This displays the system voltage measured by the ECM 23 Main Relay Active/ Inactive Active Active Active This displays operating status for the ECM main relay. 24 Glow Time Relay Active 0V/ Inactive 12V Inactive 12V Inactive 12V This displays operating status for the glow relay. This 25 Check Engine On/Off Off Off Off This displays operating status for the Check Engine 26 Glow Time Telltale On/Off Off Off Off This displays operating status for the glow indicator lamp. 27 EGR Pulse Ratio % 70 60 - 70 60 - 70 This displays the duty signal from the ECM to control the 28 EGR Command mg/strk 340 - 360 350 - 370 350 - 370 This displays EGR amount commanded value from the 29 Intake Manifold Active/ Inactive Inactive Inactive Inactive This displays operating status of the intake throttle. This 30 Exhaust Brake Active/ Inactive Inactive Inactive Inactive This displays operating status of the exhaust throttle. This 31 Exhaust Brake Active/ Inactive Inactive Inactive Inactive This displays operating status of the exhaust throttle. This 32 Desired Engine rpm 730 730 730 The desired engine idle speed that the ECM 33 Start of Delivery °CA 18 - 22 22 - 24 22 - 24 This displays commanded value from the ECM when 34 A/C Request Active 0V/ Inactive 12V Inactive 12V Inactive 12V This displays operating status of the A/C compressor. 35 Immobiliser Active/ Inactive Inactive Inactive Inactive This should display “Inactive” when the immobiliser is 36 Immobiliser Signal Received/ Not Received Not Received Not Received This should display “Not Received” when the immobiliser 37 Immobiliser Yes/No Yes Yes Yes This should display “Yes” when the immobiliser is Tech 2/TIS 2000 Parameter Units Idle 1500rpm 2000rpm Description |