Infiniti M35/M45 Y50. Manual - part 1135

TRANSFER ASSEMBLY

TF-47

C

E

F

G

H

I

J

K

L

M

A

B

TF

7.

Remove rear oil seal from rear case, using the puller.

CAUTION:

Be careful not to damage the rear case.

8.

Remove spacer from mainshaft.

9.

Remove front case and rear case fixing bolts, then remove har-
ness bracket.

10. Separate front case and rear case. Then, remove front case by

levering it up with a tire lever or the like. 

CAUTION:

Be careful not to damage the mating surface.

Tool number

: KV381054S0 (J-34286)

PDIA0259E

PDIA0260E

Bolts symbol

Quantity

Bolt length “

” mm (in)

A

11

42 (1.65)

B

1

162 (6.38)

C

1

97 (3.82)

TORX bolts

1

40 (1.57)

PDIA0251E

SDIA2460E

TF-48

TRANSFER ASSEMBLY

11. Remove snap ring from front case.

12. Remove mainshaft bearing from front case, using the drift.

13. Remove drive chain and front drive shaft while tapping front

drive shaft with plastic hammer.

CAUTION:

Be careful not to tap drive chain.

14. Remove oil gutter from rear case.

15. Remove oil cover bolt and sensor fixing bolt from rear case. And

then, remove oil cover.

NOTE:
Regarding models after december 

′

06, temperature sensor may

not included.

PDIA0267E

Tool number

: KV38100300 (J-25523)

PDIA0256E

PDIA0257E

PDIA0261E

SDIA2403E

TRANSFER ASSEMBLY

TF-49

C

E

F

G

H

I

J

K

L

M

A

B

TF

16. Remove retainer from transfer assembly harness connector.

17. Remove transfer assembly harness connector from rear case.

18. Remove O-ring from transfer assembly harness connector.

19. Remove mainshaft assembly from rear case, using the drift.

20. Remove snap ring from rear case.

21. Remove rear bearing from rear case, using the drifts.

22. Remove baffle plate from rear case.

23. Remove breather tube from rear case.

SDIA1597E

Tool number

: ST33052000 (

—

)

PDIA0262E

PDIA0263E

Tool number

A: ST30611000 (J-25742-1)

B: ST35321000 (

—

)

PDIA0264E

SDIA1701E

TF-50

TRANSFER ASSEMBLY

Mainshaft Assembly

1.

Separate front case and rear case, then remove mainshaft assembly. Refer to 

TF-46, "Front Case and

Rear Case"

 .

2.

Remove snap ring from mainshaft.

3.

Remove spacer from mainshaft.

4.

Remove electric controlled coupling and sprocket from main-
shaft.

5.

Remove needle bearing from mainshaft.

Front Drive Shaft and Drive Chain

1.

Separate front case and rear case. Refer to 

TF-46, "Front Case and Rear Case"

 .

2.

Remove drive chain and front drive shaft while tapping front
drive shaft with plastic hammer.

CAUTION:

Be careful not to tap drive chain.

3.

Remove front drive shaft front bearing, using the drift and puller.

4.

Remove front drive shaft rear bearing, using the drift and puller.

SDIA1602E

PDIA0257E

Tool number

: ST31214000 (J-25269-B)

PDIA0269E

Tool number

: ST31214000 (J-25269-B)

PDIA0270E