|
|
EXL-74 < COMPONENT DIAGNOSIS > [XENON TYPE] FRONT FOG LAMP CIRCUIT 4. With operating the test items, check the voltage between the IPDM E/R harness connector and the Is the measurement value normal? YES >> GO TO 5. NO >> Replace IPDM E/R. 5. CHECK FRONT FOG LAMP OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect IPDM E/R connector. 3. Check continuity between the IPDM E/R harness connector and the front combination lamp harness con- Does continuity exist? YES >> GO TO 6. NO >> Repair the harnesses or connectors. 6. CHECK FRONT FOG LAMP GROUND CIRCUIT OPEN CIRCUIT Check continuity between the front combination lamp harness connector and the ground. Does continuity exist? YES >> Replace the front combination lamp. NO >> Repair the harnesses or connectors. Terminals Test item Voltage (Approx.) (+) ( − ) IPDM E/R Ground EXTERNAL LAMP Connector Terminal RH E8 86 FOG Battery LH 87 OFF 0 V IPDM E/R Front combination lamp Continuity Connector Terminal Connector Terminal RH E8 86 E28 1 Existed LH 87 E58 1 Front combination lamp Ground Continuity Connector Terminal RH E28 4 Existed LH E58 4 |