Infiniti G35 (V35). Manual - part 182

INTELLIGENT KEY SYSTEM

BL-115

C

D

E

F

G

H

J

K

L

M

A

B

BL

*: Select “SELECTION FROM MENU”.

WORK SUPPORT

TRUNK SW*

Indicates [OPEN/CLOSE] condition of trunk room lamp switch from BCM via CAN communication 
line.

VEHICLE SPEED*

Indicates [km/h] condition of vehicle speed.

Monitor item 

Content

Monitor item

Description

CONFIRM KEY FOB ID

It can be checked whether Intelligent Key ID code is registered or not in this mode.

TAKE OUT FROM WINDOW 
WARN

Take away warning chime (from window) mode can be changed to operate (ON) or not operate 
(OFF) with this mode. The operation mode will be changed when “CHANGE SETT” on CON-
SULT-II screen is touched.

LOW BAT OF KEY FOB WARN

Intelligent Key low battery warning mode can be changed to operate (ON) or not operate (OFF) 
with this mode. The operation mode will be changed when “CHANGE SETT” on CONSULT-II 
screen is touched.

SELECTIVE UNLOCK FUNC-
TION

Selective unlock function mode can be changed to operate (ON) or not operate (OFF) with this 
mode. The operation mode will be changed when “CHANGE SETT” on CONSULT-II screen is 
touched.

ANTI KEY LOCK IN FUNCTION

Key reminder function mode can be changed to operate (ON) or not operate (OFF) with this 
mode. The operation mode will be changed when “CHANGE SETT” on CONSULT-II screen is 
touched.

HORN WITH KEYLESS LOCK

Horn reminder function mode by Intelligent Key remote control button can be changed to operate 
(ON) or not operate (OFF) with this mode. The operation mode will be changed when “CHANGE 
SETT” on CONSULT-II screen is touched.

HAZARD ANSWER BACK

Hazard reminder function mode can be selected from the following with this mode. The operation 
mode will be changed when “CHANGE SETT” on CONSULT-II screen is touched.

●

LOCK ONLY: Door lock operation only

●

UNLOCK ONLY: Door unlock operation only

●

LOCK/UNLOCK: Lock/Unlock operation

●

OFF: Non-operation

ANSWER BACK WITH I-KEY 
LOCK

Horn reminder function (lock operation) mode by door request switch (driver side, passenger side 
and trunk) can be selected from the following with this mode. The operation mode will be 
changed when “CHANGE SETT” on CONSULT-II screen is touched.

●

HORN CHIRP: Sound horn

●

BUZZER: Sound buzzer

●

OFF: Non-operation

ANSWER BACK WITH I-KEY 
UNLOCK

Horn reminder function (unlock operation) mode by door request switch can be changed to oper-
ate (ON) or not operate (OFF) with this mode.

AUTO RELOCK TIMER

Auto door lock timer mode can select the following with this mode.

●

1 minute

●

5 minute

●

OFF: Non-operation

PANIC ALARM DELAY

Panic alarm button's pressing time on Intelligent Key remote control button can be selected from 
the following with this mode. The operation mode will be changed when “CHANGE SETT” on 
CONSULT-II screen is touched.

●

0.5 second

●

1.5 second

●

OFF: Non-operation

TRUNK/GLASS HATCH OPEN

Hazard and horn reminder function mode by trunk request switch can be changed to operate 
(ON) or not operate (OFF) with this mode. The operation mode will be changed when “CHANGE 
SETT” on CONSULT-II screen is touched.

BL-116

INTELLIGENT KEY SYSTEM

ACTIVE TEST

TRUNK OPEN DELAY

Trunk button's pressing time on Intelligent Key remote control button can be selected from the fol-
lowing with this mode. The operation mode will be changed when “CHANGE SETT” on CON-
SULT-II screen is touched.

●

0.5 second

●

1.5 second

●

OFF: Non-operation

P/W DOWN DELAY

Unlock button's pressing time on Intelligent Key remote control button can be selected from the 
following with this mode. The operation mode will be changed when “CHANGE SETT” on CON-
SULT-II screen is touched.

●

3 seconds

●

5 seconds

●

OFF: Non-operation

ENGINE START BY I-KEY

Engine start function mode can be changed to operate (ON) or not operate (OFF) with this mode. 
The operation mode will be changed when “CHANGE SETT” on CONSULT-II screen is touched.

LOCK/UNLOCK BY I-KEY

Door lock/unlock function by door request switch (driver side, passenger side and trunk) mode 
can be changed to operate (ON) or not operate (OFF) with this mode. The operation mode will be 
changed when “CHANGE SETT” on CONSULT-II screen is touched.

Monitor item

Description

Test item

Description

DOOR LOCK/UNLOCK

This test is able to check door lock/unlock operation.

●

The all door lock actuators are unlocked when “ALL UNLK” on CONSULT-II screen is touched.

●

The door lock actuator (driver side) is unlocked when “DR UNLK” on CONSULT-II screen is 
touched.

●

The door lock actuator (passenger side) is unlocked when “AS UNLK” on CONSULT- II screen 
is touched.

●

The door lock actuator (back door) is unlocked when “BK UNLK” on CONSULT- II screen is 
touched.

●

The all door lock actuators are locked when “LOCK” on CONSULT-II screen is touched.

ANTENNA

This test is able to check Intelligent Key antenna operation.
When the following conditions are met, hazard warning lamps flash.

●

Inside key antenna (Dashboard) detects Intelligent Key, when “RM ANT1” on CONSULT-II 
screen is touched.

●

Inside key antenna (Center console) detects Intelligent Key, when “RM ANT2” on CONSULT-II 
screen is touched.

●

Inside key antenna (Trunk room) detects Intelligent Key, when “LAG ANT” on CONSULT-II 
screen is touched.

●

Outside key antenna (Driver side) detects Intelligent Key, when “DR ANT” on CONSULT-II 
screen is touched.

●

Outside key antenna (Passenger side) detects Intelligent Key, when “AS ANT” on CONSULT-II 
screen is touched.

●

Outside key antenna (Rear bumper) detects Intelligent Key, when “BD ANT” on CONSULT-II 
screen is touched.

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer (engine room) operation.
Intelligent Key warning buzzer (engine room) sounds when “ON” on CONSULT-II screen is 
touched.

INTELLIGENT KEY SYSTEM

BL-117

C

D

E

F

G

H

J

K

L

M

A

B

BL

INSIDE BUZZER

This test is able to check Intelligent Key warning buzzer (Instrument panel) operation.

●

Take away warning chime sounds when “TAKE OUT” on CONSULT-II screen is touched.

●

Ignition switch warning chime sounds when “KNOB” on CONSULT-II screen is touched.

●

Ignition key warning chime sounds when “KEY” on CONSULT-II screen is touched.

INDICATOR

This test is able to check warning lamp operation.

●

“KEY” Warning lamp (Green) illuminates when “BLUE ON” on CONSULT-II screen is touched.

●

“KEY” Warning lamp (Red) illuminates when “RED ON” on CONSULT-II screen is touched.

●

“P-SHIFT” Warning lamp illuminates when “KNOB ON” on CONSULT-II screen is touched.

●

“KEY” Warning lamp (Green) flashes when “BLUE IND” on CONSULT-II screen is touched.

●

“KEY” Warning lamp (RED) flashes when “BLUE IND” on CONSULT-II screen is touched.

●

“P-SHIFT” Warning lamp flashes when “KNOB ON” on CONSULT-II screen is touched.

Test item

Description

BL-118

INTELLIGENT KEY SYSTEM

Trouble Diagnosis Symptom Chart

NIS001JT

KEY WARNING LAMP (GREEN) ILLUMINATES

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to 

BL-

112, "Trouble Diagnosis Procedure"

  

●

Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.

●

If the following “symptoms” are detected, check systems shown in the “Diagnoses/service procedure” col-
umn in this order.

Conditions of Vehicle (Operating Conditions)

●

Intelligent Key is registered.

●

Key is not inserted in ignition switch.

●

One or more registered Intelligent Keys are in the vehicle.

KEY WARNING LAMP (RED) ILLUMINATES

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to 

BL-

112, "Trouble Diagnosis Procedure"

 .

●

Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.

●

If the following “symptoms” are detected, check systems shown in the “Diagnoses/service procedure” col-
umn in this order.

Conditions of Vehicle (Operating Conditions)

●

Intelligent Key is registered.

●

Key is not inserted in ignition switch.

●

One or more registered Intelligent Keys are in the vehicle.

Symptom

Diagnosis/service procedure

Reference page

Ignition switch does not turn on with Intelligent Key. 
[KEY warning lamp (green) illuminates.]

1. Check steering lock unit.

BL-146

2. Replace Intelligent Key unit.

BL-157

Symptom

Diagnosis/service procedure

Reference page

Ignition switch does not turn on with Intelligent 
Key. [KEY warning lamp (red) illuminates.]

1. Check inside key antenna.

BL-145

2. Replace Intelligent Key unit.

BL-157