Infiniti EX35. Manual - part 842
DOOR PARTING SEAL
EXT-47
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
3.
Remove front door parting seal.
REAR DOOR PARTING SEAL (LOWER)
1.
Fully open rear door.
2.
Using a remover tool (A), disengage the clips from the rear door
parting seal (1).
CAUTION:
• Disengage the clips slowly and carefully.
• Do not pull the rear door parting seal strongly.
REAR DOOR PARTING SEAL (FRONT)
1.
Fully open front door.
2.
Pull back rear door parting seal (front).
CAUTION:
Do not bend the rear door parting seal strongly.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• When installing door parting seal, check that blind clips are securely fitted in panel holes on body,
and then press them in.
• When installing, check visually the fillet molding and the clips, then replace them with new parts if
they have been damaged.
• Replace double-faced adhesive tape on back of rear door parting seal (front) with a new tape if rear
door parting seal (front) is reused.
• Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front)
using double-faced adhesive tape remover when removing rear door parting seal (front).
• Do not wash the vehicle with in 24 hours after installing so as to keep adhesive.
: Clip
JMKIA2212ZZ