|
|
Content .. 1254 1255 1256 1257 ..
RETURN COMPLETE LIMIT SWITCH SE-31 < COMPONENT DIAGNOSIS > C D E F G H I K L M A B SE N O P Is the inspection result normal? YES >> Return complete limit switch (LH) is OK. NO >> Replace return complete limit switch (LH) [rear seatback lock assembly (LH)]. Refer to RH RH : Description INFOID:0000000003642188 Detect the return completion position of rear seatback (RH). RH : Component Function Check INFOID:0000000003642189 1. CHECK FUNCTION Check that the rear seatback (RH) rises when pressing and holding the power return switch (RH) or rear seat- YES >> Return complete limit switch (RH) is OK. NO >> Refer to SE-31, "RH : Diagnosis Procedure" . RH : Diagnosis Procedure INFOID:0000000003642190 1. CHECK REAR SEATBACK POWER RETURN CONTROL UNIT INPUT SIGNAL 1. Turn ignition switch OFF. 2. Check voltage between rear seatback power return control unit harness connector and ground. NOTE: Is the inspection result normal? YES >> Return complete limit switch (RH) is OK. NO >> GO TO 2. 2. CHECK RETURN COMPLETE LIMIT SWITCH (RH) SIGNAL CIRCUIT 1. Disconnect rear seatback power return control unit connector and rear seatback lock assembly (RH) con- 2. Check continuity between rear seatback power return control unit harness connector and rear seatback 3. Check continuity between rear seatback power return control unit harness connector and ground. Is the inspection result normal? YES >> GO TO 3. (+) (–) Condition Voltage (V) (Approx.) Rear seatback power return control unit Connector Terminal B226 30 Ground When the rear seatback (RH) is in the return Battery voltage When the rear seatback (RH) is in the fold- 0 Rear seatback power return control unit Rear seatback lock assembly (RH) Continuity Connector Terminal Connector Terminal B226 30 B506 13 Existed Rear seatback power return control unit Ground Continuity Connector Terminal B226 30 Not existed |