|
|
Cylinder Head - Top/End Views Fig. 4: Cylinder Head - Top/End Views Cylinder Head - Top/End Views 2.0 5 M8 x 1.25 210 206 207 208 209 26.5 (1.043) 19.0 (0.748) Bolt hole 2 has an 11.5 mm (0.452 in) counterbore included in the 42.5 mm (1.67 in) Bolt hole 3 has a 1.5 mm (0.059 in) counterbore included in the 31.0 mm (1.22 in) Bolt hole 4 has a 20.5 mm (0.807 in) counterbore included in the 53.5 mm (2.10 in) Hole Thread Size Insert Drill Counterbore Tool Tap Driver Drill Depth - Maximum mm (in) Tap Depth - Maximum mm (in) J 42385- 1 M8 x 1.25 210 206 207 208 209 26.5 (1.04) 19.0 (0.784) 2 M6 x 1.0 205 201 202 203 204 20.05 (0.789) 16.05 (0.632) 3 M10 x 215 211 212 213 214 28.0 (1.10) 20.0
2008 Hummer H3 2008 ENGINE Engine Mechanical - 5.3L - H3
|