FE11-0269b

5.

Remove the tail lamp.

FE11-0270b

6.

Remove the tail lamp cover and remove the tail lamp bulb.

Installation Procedure:

Note

Avoid touching the bulb or letting the bulb to come into
contact with any moist. When the lamp is turned on, the
grease  or  moisture  on  the  bulb  may  cause  the  bulb
explode.  If  the  bulb  contacts  with  grease  or  moisture,
clean the bulb with alcohol or an appropriate cleaning
agent and dry the bulb.

Body Electric

Lighting System

11-137

FE11-0271b

1.

Install the tail lamp into the tail lamp assembly and install
the tail lamp cover.

2.

Install the tail lamp assembly.

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

11-138

Lighting System

Body Electric

3.

Connect the tail lamp wiring harness connector.

4.

Install the rear compartment side trim panel.

5.

Connect the battery negative cable.

FE11-0274b

6.

To replace the tail lamp bulb, open the tail lamp cover.

11.4.8.13 Tail Lamp Replacement (Hatchback)

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

Body Electric

Lighting System

11-139

FE11-0275c 

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove the hatchback trim panel. Refer to 

12.9.1.10

 

Rear

Compartment Trim Panel Replacement (Hatchback)

.

FE11-0276b

3.

Disconnect the tail lamp harness connector.

11-140

Lighting System

Body Electric