Installation Procedure:

FE08-0069b

1.

Install  the  condenser  to  the  mount  from  the  vehicle
bottom.

2.

Install  the  condenser  front  baffle  and  tighten  the  lower
retaining bolts.

Torque: 10-12 Nm (Metric) 7.4-8.9 lb-ft (US English)

1

2

1

3

3

FE08-0070b

3.

Lower the vehicle.

4.

Install and tighten the condenser top retaining bolts (1).

Torque: 11 Nm (Metric) 8.1 lb-ft (US English)

5.

Install  and  tighten  the  condenser  upper  air-conditioning
hard pipe fittings (2).

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

6.

Install  and  tighten  the  condenser  front  baffle  upper
retaining bolts (3).

Torque: 12 Nm (Metric) 8.9 lb-ft (US English)

1

2

1

3

3

FE08-0070b

7.

Lift the vehicle, install and tighten the condenser lower air-
conditioning hard pipe fittings (1).

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

8.

Install  and  tighten  the  condenser  front  baffle  lower
retaining bolts (2).

Torque: 12 Nm (Metric) 8.9 lb-ft (US English)

9.

Install the engine bottom shield.

10. Lower the vehicle and install the radiator upper grille.

11. Carry out the air-conditioning refrigerant filling procedure.

Refer  to 

8.2.7.10

 

Air-conditioning  Refrigerant  Recovery

and Filling

.

Heating, Ventilation and A/C System

Automatic Air-conditioning

8-67

8.2.8.16  Ambient  and  Sun  Light  Sensor
Replacement

Refer  to 

11.4.8.20

 

Ambient  and  Sun  Light  Sensor

Replacement

.

8.2.8.17 

Outside 

Temperature 

Sensor

Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

1

2

FE08-0054b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove the engine bottom shield. Refer to 

12.10.1.7

 

Left

and Right Engine Bottom Shield Replacement

.

3.

Disconnect  the  outside  temperature  sensor  wiring
harness connector (1).

4.

Remove the outside temperature sensor (2).

Installation Procedure:

2

1

FE08-0055b

1.

Install the outside temperature sensor (1).

2.

Connect the outside temperature sensor wiring harness
connector (2).

3.

Install the engine bottom shield.

4.

Connect the battery negative cable.

8-68

Automatic Air-conditioning

Heating, Ventilation and A/C System

8.2.8.18 

Inside 

Temperature 

Sensor

Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

1

2

FE08-0060b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove the instrument panel lower right side panel. Refer
to 

12.8.3.1

 

Instrument Panel Replacement

.

3.

Disconnect the inside temperature sensor wiring harness
connector (1).

4.

Disconnect the air hose connection (2).

FE08-0061b

5.

Remove the inside temperature sensor.

Heating, Ventilation and A/C System

Automatic Air-conditioning

8-69

Installation Procedure:

3

1

2

FE08-0062b

1.

Install the inside temperature sensor (1).

2.

Connect the air hose connection (2).

3.

Connect  the  inside  temperature  sensor  wiring  harness
connector (3).

4.

Install the instrument panel lower right side panel.

5.

Connect the battery negative cable.

8.2.8.19 Evaporator Temperature Sensor and
Heat Core Temperature Sensor Replacement

Evaporator Temperature Sensor Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

FE08-0056b  

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove  the  air-conditioning  assembly.  Refer  to

8.2.8.5

 

Air-conditioning Assembly Replacement

.

3.

Separate the radiator and the blower assembly.

4.

Remove  the  evaporator  core  body.  Refer  to

8.2.8.14

 

Evaporator Core Replacement

.

5.

Remove the evaporator temperature sensor.

8-70

Automatic Air-conditioning

Heating, Ventilation and A/C System