|
|
The M2 Maintenance Interval Operations tables list you find detailed instructions in this manual on the Maintenance Operation Number M2 Maintenance Interval Operations for Service Schedules I, II, and III • Schedule I: every 5000 miles (8000 km) or 500 hours Check Perform All M1 Operations Engine Drive Belt Inspection Alternator, Battery, and Starter Connections Check Pressure Relief Cap Check Fan Clutch Check (noise emission control) Clutch Release Cross-Shaft Lubrication Meritor Clutch Release Bearing Lubrication Transmission Fluid Level Inspection Manual Transmission Air Filter/Regulator Check, Cleaning, or Replacement Allison Transmission Fluid and Filter Change (Castrol TranSynd or other TES 295 Suspension Inspection Suspension U-Bolt Torque Check Knuckle Pin Lubrication, Meritor Axles Tie Rod Inspection Tie Rod Lubrication, Meritor Axles Axle Breather and Axle Lubricant Level Inspection Wheel Nut Check Air Brake System Valve Inspection Air Dryer Inspection Alcohol Evaporator Cleaning and Inspection Meritor Slack Adjuster Lubrication Drag Link Inspection Power Steering Fluid Level Inspection Power Steering Gear Lubrication Drag Link Lubrication Fuel Filter Replacement Fuel/Water Separator Element Checking and Replacement Mirror Folding Check Air Conditioner Inspection General Information 00 M2 Maintenance Interval Operations: 00–05 00/11 |