|
|
10. CHECKING STORED OR INTERMITTENT CODES NOTE: Diagnose and repair all active codes before diagnosing stored codes. Refer to the Table of Contents WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min- Reconnect all disconnected components and harness connectors. WARNING: To avoid personal injury or death, turn the ignition on, then reconnect the battery. • Wiggle the wiring harness and connectors of the related airbag circuit. • Continue the test until either a code becomes active or the problem area is isolated. In the previous steps you have attempted to recreate the conditions responsible for setting the DTC in question / Are any ACTIVE DTCs present? Yes >> Select the appropriate diagnostic procedure from the Table of Contents in this section. No >> No problem found at this time. Perform the Occupant Classification Module System Verification Test in this Section. Erase all codes before returning vehicle to customer. PM RESTRAINTS - ELECTRICAL DIAGNOSTICS 8O - 193 |