|
|
Content .. 1079 1080 1081 1082 ..
24. Connect the wiring harness connector to the line pressure sensor (2). CAUTION: It is essential that correct length bolts 25. Install torque converter-to-driveplate bolts. Tighten bolts to 31 N·m (270 in. lbs.). 26. Install starter motor and cooler line bracket. 27. Connect cooler lines to transmission. 28. Install transmission fill tube. 29. Install exhaust components. 30. Install the structural dust cover (2) onto the trans- mission and the engine. (Refer to 9 - ENGINE/ BLOCK/STRUCTURAL COVER - INSTALLATION) 21 - 716 AUTOMATIC TRANSMISSION 545RFE - SERVICE INFORMATION ND |