5
MODIFICATIONS TO THE ELECTRICAL INSTALLATION
Modifications to the electrical installation from chassis number 0E477514
4-28
Description of central door locking, driver’s
side (B199) and central door locking motor,
co-driver’s side (B200).
The description of both components is similar to
description B200 as above.
Starting position: both doors locked.
Unlock the co-driver’s side door using the key.
This is the same as the standard version. The
other door remains locked.
Unlock the co-driver’s side door using switch
C803.
If switch C803 is engaged (connection between
pin 1 and 5/3), connection DO of component
B200 is connected to earth. B200 is activated in
the same way as in the standard version.
Starting position: both doors unlocked.
Driver’s side door locked using key/button.
The action is similar to that in the standard
version; in this case, however, unit D862 will
measure an earth signal through connection DL
(wire 4538) to pin 1. D862 now connects pin 2 to
earth, also activating B200. The co-driver’s side
door is now also locked.
Locking co-driver’s side door using key/button.
The operation is the same as the operation
described above. However, unit D862 now
measures an earth signal at pin 2 and will,
therefore, connect pin 1 of component B199 to
earth. The driver’s side door is now also locked.
Note:
If one or both door switches sends a positive
signal to pin 3 or 4 of unit D862, the
accompanying components B199 and/or B200
will not be activated.
11
ǹ 0209