Index Chrysler Chrysler Sebring, Stratus sedan, Sebring Convertible - service repair manual 2001-2007 year
|
|
Symptom: P0581-SPEED CONTROL SWITCH #1 HIGH When Monitored and Set Condition: P0581-SPEED CONTROL SWITCH #1 HIGH When Monitored: With the ignition key on. Battery voltage above 10 volts. Set Condition: The PCM detects an open or short to voltage in the Speed Control Switch Signal circuit. One Trip Fault. POSSIBLE CAUSES SPEED CONTROL SWITCH VOLTAGE HIGH SPEED CONTROL SWITCHES (V37) S/C SWITCH SIGNAL CIRCUIT SHORTED TO BATTERY VOLTAGE (K4) SENSOR GROUND OPEN PCM TEST ACTION APPLICABILITY 1 NOTE: Do not press any of the Speed Control Switch buttons. t, read the Speed Control voltage. Is the Speed Control voltage above 4.8 volt? All Yes → Go To 2 No → Refer to the INTERMITTENT CONDITION symptom in the Driveability category. 2 Turn the ignition off. All Yes → Go To 3 No → Replace the Speed Control Switch that had the incorrect resis- tance value. 241 DRIVEABILITY - NGC |