|
|
Symptom: P0335-CRANKSHAFT POSITION SENSOR CIRCUIT When Monitored and Set Condition: P0335-CRANKSHAFT POSITION SENSOR CIRCUIT When Monitored: Engine cranking. Set Condition: No CKP signal is present during engine cranking, and at least 8 camshaft position sensor signals have occurred. One trip fault. POSSIBLE CAUSES CHECKING INTERMITTENT CMP SIGNAL WITH LAB INTERMITTENT CKP SIGNAL (K6) 5 VOLT SUPPLY CIRCUIT SHORTED TO GROUND (K6) 5 VOLT SUPPLY CIRCUIT OPEN (K6) 5 VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE (K24) CKP SIGNAL CIRCUIT SHORTED GROUND (K24) CKP SIGNAL CIRCUIT OPEN (K24) CKP SIGNAL CIRCUIT SHORTED TO VOLTAGE (K24) CKP SIGNAL SHORTED TO (K6) 5 VOLT SUPPLY CIRCUIT (K4) SENSOR GROUND CIRCUIT OPEN PCM - (K6) 5 VOLT SUPPLY PCM - (K24) CKP SIGNAL CRANKSHAFT POSITION SENSOR TEST ACTION APPLICABILITY 1 Start the engine. t, read the CKP SYNC State. Does the DRBIII t display CKP SYNC state IN SYNC? All Yes → Go To 2 No → Go To 4 122 DRIVEABILITY - NGC |