|
|
TEST ACTION APPLICABILITY 3 With the DRBIII t in Inputs/Outputs, read the FULL OPEN SWITCH state. Open the Sliding Door to mid position. t, wiggle the wiring harness from the Power Sliding Door Module to the Full Open Switch on the lower drive unit. All Yes → Repair the Full Open Switch Sense circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1. No → Go To 4 4 If there are no possible causes remaining, view repair. All Repair Replace the Full Open Switch (lower drive unit). 1061 POWER DOORS - SLIDING INCOMPLETE POWER OPEN - FULL OPEN SWITCH FAILURE — Continued |