|
|
Symptom: DRIVER FRONT RISER SENSOR OUT OF RANGE LOW When Monitored and Set Condition: DRIVER FRONT RISER SENSOR OUT OF RANGE LOW When Monitored: Continuously when the PCI bus is active. Set Condition: This code is immediately set when the seat motor potentiometer feeds a value lower than the Memory Seat/Mirror/Adjustable Pedals Module has stored in POSSIBLE CAUSES MEMORY SEAT/MIRROR/ADJUSTABLE PEDALS MODULE 5 VOLT SUPPLY SEAT 5 VOLT SUPPLY WIRE SHORT TO GROUND SEAT SENSOR 5 VOLT SUPPLY WIRE OPEN FRONT RISER POSITION SIGNAL CIRCUIT OPEN FRONT RISER POSITION SIGNAL CIRCUIT SHORT TO GROUND FRONT RISER SENSOR LOW MEMORY SEAT/MIRROR/ADJUSTABLE PEDALS MODULE FRONT RISER LOW STORED DIAGNOSTIC TROUBLE CODE TEST ACTION APPLICABILITY 1 With the DRBIII t, erase the DTC from Memory Seat/Mirror/Adjustable Pedals Module. t check for the same DTC to reset in the MSMAPM. Did the same DTC reset? All Yes → Go To 2 No → Using the wiring diagram/schematic as a guide, inspect the wiring and connectors for an intermittent condition. 2 Ensure the Memory Seat/Mirror/Adjustable Pedals Module is fully connected before All Yes → Go To 3 No → Go To 7 821 MEMORY SEAT |