|
|
Content .. 1316 1317 1318 1319 ..
TEST ACTION APPLICABILITY 6 Turn the ignition off to the lock position. t, erase Transmission DTCs. In AutoStick mode, perform multiple AutoStick upshifts and downshifts. t, read Transmission DTCs. Does the DTC return? All Yes → Go To 7 No → Test Complete. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION 7 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Powertrain Control Module per the Service Informa- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 8 The conditions necessary to set the DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION No → Test Complete. 273 TRANSMISSION - NGC P0953-AUTOSTICK INPUT CIRCUIT HIGH — Continued |