|
|
TEST ACTION APPLICABILITY 7 Turn the ignition off. All Yes → Check the wiring harness between the in-line C202 harness connector (plenum side) and the Evap Temp Sensor for an open. t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. No → Repair the Sensor Ground circuit between the ATC C2 harness connector and the in-line C202 harness connector (HVAC side) for t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 341 AUTOMATIC TEMPERATURE CONTROL EVAP TEMP SENSOR OPEN (ACTIVE) — Continued |