|
|
![]() Symptom: VEHICLE BODY STYLE MISMATCH When Monitored and Set Condition: VEHICLE BODY STYLE MISMATCH When Monitored: When the ignition is on, the ACM monitors the PCI Bus for the VIN message containing the vehicle body style from the Powertrain Control Module. The PCM Set Condition: With ignition on, If the ACM does not receive 2 consecutive matching (vehicle Body Style) VIN messages on the bus the code will set. POSSIBLE CAUSES PCM, PCI COMMUNICATION FAILURE VEHICLE BODY STYLE MISMATCH ACM, VEHICLE BODY STYLE MISMATCH STORED CODE OR INTERMITTENT CONDITION ACTIVE CODE PRESENT TEST ACTION APPLICABILITY 1 Turn the ignition on. All ACM - ACTIVE DTC ACM - STORED DTC NOTE: When reconnecting Airbag system components, the ignition must be 2 Turn the ignition on. t to the data link connector and select PASSIVE RESTRAINTS, AIRBAG, SYSTEM TEST. t, read the PCM Active on the Bus:. Does the DRB show PCM ACTIVE ON THE BUS:? All Yes → Go To 3 No → Refer to category COMMUNICATION CATEGORY and select the related symptom. 285 AIRBAG |