|
|
Symptom: OCM CONFIGURATION MISMATCH When Monitored and Set Condition: OCM CONFIGURATION MISMATCH When Monitored: At Ignition on the Airbag Control Module monitors the PCI Bus messages for OCM PCI Bus messages and then compares the messages to the ACM Set Condition: The DTC will be set if the ACM is not configured for PASSENGER ONLY OCM and the Occupant Classification Module messages are on PCI Bus. POSSIBLE CAUSES ACM NOT CONFIGURED FOR SIDE AIRBAGS ACM, OCM CONFIGURATION STORED CODE OR INTERMITTENT CONDITION ACTIVE CODE PRESENT TEST ACTION APPLICABILITY 1 Turn the ignition on. All ACM - ACTIVE DTC ACM - STORED DTC NOTE: When reconnecting Airbag system components, the ignition must be 2 Inspect vehicle for a Occupant Classification System and Passenger On - Off All Yes → Go To 3 No → Go To 4 3 With the DRBIII t read the VIN and ACM part number. Verify that the ACM is the correct part for this vehicle. All Yes → Replace the Powertrain Control Module in accordance with the Service Information. No → Go To 4 205 AIRBAG |