|
|
Content .. 1028 1029 1030 1031 ..
TEST ACTION APPLICABILITY 2 Has the battery been disconnected, lost it’s charge, or been replaced recently? All Yes → Disconnecting or replacing the battery will set this DTC. Erase the DTC. No → Go To 3 3 Has a Quick Learn procedure been performed? All Yes → Performing Quick Learn will set this DTC. Erase the DTC. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION No → Go To 4 4 Has the PCM been replaced or disconnected? All Yes → Replacing or disconnecting the PCM will set this DTC. Erase the DTC. No → Go To 5 5 Turn the ignition off to the lock position. All Yes → Go To 6 No → Repair the Fused B+ circuit for an open. If the fuse is open make sure to check for a short to ground. 152 TRANSMISSION - NGC P1684-BATTERY WAS DISCONNECTED — Continued |