Chery International Maintenance and Service
Please do not exceed a
MAX speed of 50km/h
when using snow chain.
Remove the snow chain
immediately
if
road
without snow.
When the snow chain is in service, the
driving
performance
of
vehicle
equipped with anti-skid system might be
slightly abnormal. Turning off the
system can solve the problem.
To avoid damaging the full-diameter
round cover, disassemble it before
install the snow chain.
Install the round cover back
immediately after disassemble the snow
chain.
Drive Belts
Drive belt is one of the parts subject to
the most severe stress. Therefore, the
belt must be of high quality and reliable
to meet operational needs.
When replacing the belt, it cannot meet
the need if using belts with the same
dimension. For the sake of security,
please ONLY use Chery original belts.
Suitable belts are always available in
Chery Authorized Service Stations.
Tension Check for Drive
Belts
Notice:
Belt may extend after a period of usage
and the belt will get loose when the
extension reaches certain level, which
will result in malfunction and damage to
the vehicle. Therefore, the tension must
be checked after driving 1000km.
Inspection procedures
1.
Switch off the ignition and take off
the key.
2.
Press the middle part of the belt
with thumb (approx.100N) to test
the flexibility.
Max flexibility: 10mm.
3.
If the flexibility exceeds the limit,
please go to Chery Authorized
Service Station for adjustment
immediately.
Vehicle Cleaning
Do not dump the cleaning materials into
living garbage. And please use qualified
local waste treatment facilities.