|
|
Service Manual for Chery·Tiggo(T11) Engine Section
Installation Notice O-shape seal installation (1)Make seal ring wet to install it easily. Caution: There must be no engine oil or lubricate grease on seal ring. Daub thermostat shell with sealant Specific sealant: Component of Mitsubishi brand 3M ATD or equivalent. Note: (1) Thermostat shell should be installed immediately when the sealant is still wet (in 15 minutes). (2) Don't daub oil on the sealed part in about 1 hour after installation.
Daub engine coolant induction plug with sealant Specific sealant:
3M ATD or equivalent Daub engine coolant temperature sensor with sealant Specific sealant: 3M ATD nut fastening or equivalent Hose O-shape seal ring
Sealant of diameter
|