|
|
S150 Bobcat Loader 43 Operation & Maintenance Manual OPERATING PROCEDURE (CONT’D) Selectable Joystick Control (SJC) with ‘ISO’ Pattern Leveling The Ground (Using Float Position): Figure 93 Press and hold the float button (1) [Figure 93] while the Tilt the bucket forward (3) [Figure 93] to change the With the bucket tilted farther forward, there is more force Drive backward to level loose material. To disengage, press the float button again or raise the lift IMPORTANT Never drive forward when the hydraulic control for lift I-2005-1285 Digging A Hole Figure 94 Lower the lift arms all the way (1) [Figure 94]. Put the Drive forward slowly and continue to tilt the bucket Raise the cutting edge a small amount (3) [Figure 94] to Tilt the bucket backward (3) [Figure 94] as far as it will go Filling The Hole Figure 95 Lower the lift arms (1) [Figure 95] and put the cutting Tilt the bucket forward (2) [Figure 95] as soon as it is If necessary, raise the lift arms to empty the bucket. B-15596 1 1 2 3 4 P-24820 B-15584 P-24820 3 2 1 B-15597 2 P-24820 1 |