|
|
(B). Push the spring in with a screwdriver, then install the spring seat (C). Fig. 35: Pushing The Spring In With A Screwdriver, Then Installing The Spring Seat MAIN VALVE BODY DISASSEMBLY, INSPECTION, AND REASSEMBLY 1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all passages. 2. Do not use a magnet to remove the check balls, it may magnetize the balls. 3. Inspect the valve body for scoring and damage. 4. Check all valves for free movement. If any fail to slide freely, refer to valve body repair (see VALVE BODY REPAIR ). 5. Coat all parts with ATF during assembly.
2004 Acura TSX 2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
|