|
|
DOOR MULTIPLEX CONTROL UNIT INPUT TEST 1. Remove the driver's door switch panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ). 2. Disconnect the 23P connector from the power window master switch. Fig. 46: Identifying Door Multiplex Control Unit Connector Terminals 3. Inspect the connector and socket terminals to be sure they are all making good contact. z If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system. z If the terminals look OK, go to step 4. 4. With the door multiplex control unit still disconnected, make these input tests at the connector: z If any test indicates a problem, find and correct the cause, then recheck the system. z If all the input tests prove OK, the door multiplex control unit must be faulty, replace the power
2004 Acura TSX 2004 ACCESSORIES & EQUIPMENT Multiplex Integrated Control System - TSX
|