Porshe 911 (997). Manual - part 973

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  971  972  973  974   ..

 

 

Porshe 911 (997). Manual - part 973

 

 

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Installing number plate light

4049

- Removing hazard warning light switch
- Installing hazard warning light switch

Removing hazard warning light switch

Removing hazard warning light switch

Note

The hazard warning light switch is located in the middle air vent.

Installation Location:

Overview of hazard warning light switch

4050

Releasing the air vent

1. With a screwdriver through the top air slot, release the left and right retaining clip -A- and pull the air vent

out of the dashboard.

Electrical connectors

2. Pull apart the electrical plug connections and remove the air vent.

3. Unclip and remove hazard warning light switch from the air

vent.

Installing hazard warning light switch

Installing hazard warning light switch

1. Position hazard warning light switch and press it into the air

vent.

Diagnostic system: reading out fault memory and activating systems

Removing hazard warning light switch

4051

Electrical connectors

2. Push together the electrical plug connections.

3. Observe the line routing and insert the air vent into the dashboard until it clicks into place.

4. Check function of air vent illumination, air vent adjustment and the hazard warning light switch.

997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431,
997610, 997611, 997620, 997621

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

→ Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der
Bildschirmdarstellung. Korrigieren Sie die Ausdrucke im Fehlerfall so, daß der Inhalt der
Bildschirmdarstellung zutreffend wiedergegeben wird.

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

Diagnostic system: reading out fault memory and activating systems

Installing hazard warning light switch

4052

 

 

 

 

 

 

 

Content   ..  971  972  973  974   ..