Porshe 911 (997). Manual - part 894

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  892  893  894  895   ..

 

 

Porshe 911 (997). Manual - part 894

 

 

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y

• 

Diagnostic system: reading out fault memory and activating systems

Reworking GPS antenna

3733

materiales.

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Reworking GPS antenna

3734

- Preliminary work
- Removing the car radio
- Installing the car radio
- Subsequent work
- Reading out car radio
- Programming car radio

Tools

Designation

Type

Number

Explanation

PIWIS tester

special tool

9718

Preliminary work

Preliminary work for car radio

Remove both covers on centre console. →  21 Removing and installing centre console cover - removing

Removing the car radio

Removing the car radio

Switch off ignition and remove ignition key.

3735

Screw locking device

1. Loosen the side fastening screws a few turns.

Mounting of the radio

2. Insert an Allen key sideways into the screw connection of the radio latch hooks.

3. Close the latches (2 each side) with an Allen key -A- and carefully pull out the

radio.

4. For reinstallation, open the latches with the Allen key -B- .

The number of plug connections will vary, depending on the I No. (CD changer, amplifier, etc.).
The variant without additional audio components (external Most control units) has a jumper (output to input)
connected to the optical waveguide plug.

Radio plug connections

5. Unlock antenna plug -D, E- and remove.

6. Unlock and disconnect the electrical plug connections in the order -A, B, C- .

Diagnostic system: reading out fault memory and activating systems

Removing the car radio

3736

 

 

 

 

 

 

 

Content   ..  892  893  894  895   ..