Porshe 911 (997). Manual - part 475

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  473  474  475  476   ..

 

 

Porshe 911 (997). Manual - part 475

 

 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Installing central locking switch

2057

- Preliminary work
- General warning notes
- Removing control unit for rear convenience systems
- Installing control unit for rear convenience systems
- Subsequent work
- Programming control unit for rear convenience systems
- Coding control unit for rear convenience systems

Tools

Designation

Type

Number

Explanation

PIWIS tester

special tool

9718

Preliminary work

Preparing control unit for comfort system rear

→  21 Removing and installing front seat - removing

General warning notes

General warnings for rear convenience systems control unit

WARNING

Risk of damage and injury!

2058

If care is not taken, electrical and electronic components may br destroyed.

• 

→ Before removing the control unit for rear convenience systems, switch off the ignition and remove the

ignition key.

Removing control unit for rear convenience systems

Removing control unit for rear convenience systems

Installation Location:

Installation position

Diagnostic system: reading out fault memory and activating systems

General warnings for rear convenience systems control unit

2059

Unclipping holder of control unit

1. Push holder of control unit forwards in direction of travel from behind, unclip, detach and turn it through

180°.

WARNING

Risk of damage and injury!

If care is not taken, electrical and electronic components may br destroyed.

• 

→ Before removing the control unit for rear convenience systems, switch off the ignition and remove the

ignition key.

Pulling off electric connectors

2. Release the three electrical plugs -a- and pull them away from the control unit.

Diagnostic system: reading out fault memory and activating systems

Removing control unit for rear convenience systems

2060

 

 

 

 

 

 

 

Content   ..  473  474  475  476   ..