Porshe 911 (997). Manual - part 1039

7. Remove trim panel for seat well. → 702919 21 Removing and installing trim panel for seat well - section

on "Removing"

8. Remove relay carrier. → 979019 Removing and installing relay carrier - section on "Removing"

Note

Only in the cabriolet.

9. Remove frame for roll-over protection system. → 697719 Removing and installing frame for roll-over

protection system - section on "Removing"

Note

Only in the cabriolet.

10. Remove rear window lifter. → 647119 Removing and installing rear power windows - section on

"Removing"

Note

Only in the cabriolet.

11. Remove roll-over bar. → 697219 Removing and installing roll-over bar - section on

"Removing" [997610]→ 697219 Removing and installing roll-over bar - section on "Removing" [997310
997311 997320 997321 997611 997620 997621]

12. Remove auxiliary brake light. → 947019 Removing and installing auxiliary brake light - section on

"Removing"

13. Remove rear light at left and right. → 943119 Removing and installing rear light - section on "Removing"

14. Remove rear spoiler. → 635519 Removing and installing rear spoiler - section on "Removing" [997310

997311 997610 997611]→ 635519 Removing and installing rear spoiler - section on "Removing" [997320
997321 997620 997621]

15. Remove air cleaner housing. → 242519 Removing and installing air cleaner housing - section on

"Removing"

16. Remove reservoir. → 194019 Removing and installing reservoir - section on "Removing"

17. Remove rear underbody cover. → 519419 Removing and installing rear cover - section on "Removing"

Note

Only for vehicles with tyre pressure monitoring

18. Remove rear wheel housing liner. → 536919 Removing and installing rear wheel housing liner - section

on "Removing" [997610 997611 997620 997621]→ 536919 Removing and installing rear wheel housing
liner - section on "Removing" [997310 997311 997320 997321]

Removing rear wire harness

Diagnostic system: reading out fault memory and activating systems

Preliminary work

4313

Exposing rear wire harness

Removing lateral footwell trim on driver's side

1. Remove left footwell trim panel.

1.1. Remove fuse carrier cover -1- ( -arrow A- ).

1.2. Unscrew the three fastening screws -2- and take off the footwell trim panel -3- ( -arrow B- ).

Removing lateral footwell trim on passenger's side

2. Remove right footwell trim panel.

2.1. Partly loosen floor covering -1- at the bottom in the area of the A-pillar -arrow A-

.

2.2. Unscrew both plastic nuts -2- and take off the footwell trim panel -3- ( -arrow B- ).

Undoing seat belt and fitting

3. Loosen seat belt mount at left and right.

3.1. Press off cap -1- with a screwdriver and unscrew the fastening screw -2- . Remove seat belt with fitting

-3-

 and spacer sleeve -4- .

Diagnostic system: reading out fault memory and activating systems

Exposing rear wire harness

4314

4. Disengage floor covering at the support and lay it in the vehicle

interior.

Unlocking locating peg using the removal tool

5. Remove left and right support.

5.1. Unlock locating peg -1- of the support using the commercially available removal tool

Disassembly tool, universal NR.21

.

Unscrewing fastening screws

5.2. Unscrew fastening screws -2- and nuts -3- and carefully pull the support up and out of the retaining

points.

Removing mounting saddle for rear-seat backrest

6. Remove mounting saddle for rear-seat backrest.

6.1. Unscrew the two fastening screws -1- and remove mounting saddle for rear-seat backrest -2- .

7. Remove insulating elements in the area of the rear wire harness.

Diagnostic system: reading out fault memory and activating systems

Exposing rear wire harness

4315

Removing rear wire harness

Installation Location:

Overview of plugs for rear wire harness

1

- Plug connection for main wire harness to rear wire harness, left and right

2

- Tiptronic control unit connector

3

- Connector for seat-belt tensioner, left and right

4

- Connector for rear loudspeaker, left and right

6

- Plug connection for rear window heating, left and right

7

- DME control module connector

8

- Rear relay carrier

9

- PASM connector, left and right

10

- Subwoofer connector

11

- Connector for auxiliary brake light

12

- Connector for wiper motor for rear window washer

13

- Ground point, left and right

14

- Connector for rear light, left and right

15

- Connector for engine coolant level switch

16

- Plug connection for oxygen sensor, left and right

17

- Plug connection for rear lock lower part

18

- Connector for motor for rear lid release

19

- Plug connection for wire harness for number plate light

20

- Plug for hot-film mass air flow meter

21

- Connector for air cleaner flap

22

- Plug connection for rear wire harness to wire harness for rear lid

23

- Plug connection for rear wire harness to engine wire harness

24

- Plug for angle sensor for HBA, rear left

Diagnostic system: reading out fault memory and activating systems

Removing rear wire harness

4316