|
|
Torque wrench on damper 2. Position a large torque wrench with a socket wrench insert (a/f 24) on the fastening screw. Damper screw 3. Loosen the fastening screw while a second person helps by countering with the special tool holding 4. Unscrew fastening screw and remove vibration damper - watch the friction washer between the damper and the crankshaft flange. Installing belt pulley/vibration damper - engine installed Installing vibration damper - 3.8 l engine installed Note Degrease the belt pulley before installation on the flange side of the crankshaft using solvent naphtha or 1. Position new friction washer on dowel pin on crankshaft flange. Position vibration damper (groove for dowel pin). Diagnostic system: reading out fault memory and activating systems Removing vibration damper (3.8 l) - engine installed 337 |